|
Current Dongle (HEX-NET or HEX-V2 Interfaces)
|
If you are using a HEX-NET or HEX-V2 that you bought directly from Ross-Tech:
You do not need to register. We already have you in our customer records and you are eligible for tech support.
If you purchased a HEX-NET or HEX-V2 from one of our Distributors then you should use use the Config button
in VCDS to enter your Registration information.
|
|
Out-of-Production Dongle (HEX-, KEY-, KII, or Micro-) |
If you're using a current version of VCDS (not VCDS-Lite!) that you bought directly from Ross-Tech:
You do not need to register, we already have you in our customer records and you are eligible for tech support.
If you're using a current version of VCDS (not VCDS-Lite!) and you bought your interface from one of our authorized resellers:
If you're using a current version of VCDS (not VCDS-Lite!) and you are NOT the original purchaser of the genuine Ross-Tech dongle interface:
What's a dongle?
|
|
"Dumb" Non-dongle (all other interfaces) |
If you're using a current version of VCDS (not VCDS-Lite!) that you bought directly from Ross-Tech:
If you're using an older version of our software ("VAG-COM") you must update to VCDS-Lite before you can register!
If you're using VCDS-Lite and have not bought a license or registered with Ross-Tech:
If you're using VCDS-Lite and already have a license (even for an old version of VAG-COM)
|
Unless otherwise noted, all content on this site is Copyright (c) 2000-2021 by Ross-Tech LLC. All rights reserved.
"VCDS", "VCDS-Mobile" and "HEX-NET" are Registered Trademarks of Ross-Tech, LLC.
Ross-Tech is not affiliated with the Volkswagen Group in any way.
