Corresponds to VAS-5051/5051 "Identification Services"
The Advanced ID function is only supported by control modules using the
KWP-2000 and CAN Protocols!
Note: The amount of data appearing on this
screen will vary based on what the control module supports. "N/A" in
red means that data isn't available from that module. Some fields
(like Chassis Number) may be blank if the module has never had a chassis
You can use the small [<] and
[>] buttons under Software to get version information for various portions of
the firmware in the control module.
[Go Back] to return to
the Open Controller screen.